Here we are going to root Micromax A069 bolt…
To perform this you will need to replace your stock revcovery….
You mY VOID warranty due to stock recovery change
You need these files to download
1. Drivers –> Download Drivers
2. Recovery image –> Download micromax a069 recovery
3. Scatter txt file –> download scatter file
4. Flash tool –> download flash tool
5. Super SU zip –> Download super su Zip
Now follow these steps
- First of all You need to install drivers in proper way so download them and install them…
- Now Put Recovery image and scatter file in single folder.
- Now Copy that “UPDATE-SuperSU-v1.94.zip” file in your internal sd and external sdcard.
- Now run the flash tool
- Click on loading scatter txt and select that scatter file from which folder where you put those scatter and recovery image both.
- Now Go to Flash tool option and check the DA DL sum box…
- Now make sure that your flash tool is look like this
- Now press download button and your flash tool is ready and connect your device…if this detect your device then ok, if not then switch of your device and remove battery and connect it and while connected reconnect the battery again…
- once flash will start don’t remove cable or stop this process otherwise you will brick your device.
- now when finish you will see green sign means its done…
- Now reboot into reovery mode by pressing volume up down and power button together….this combination may wary…
- in recovery menu flash that update super su zip file…
you are accepting our terms and condition
DO IT AT YOUR OWN RISK